Five problems in summer decoration

2022-07-22
  • Detail

Many consumers believe that spring and autumn are the golden seasons for decoration, and that summer construction is prone to problems. In fact, this statement is incorrect

many consumers believe that spring and autumn are the golden seasons for decoration, and that summer construction is prone to problems. In fact, this statement is incorrect. The objective conditions of high temperature and volatile water in summer are conducive to construction. In summer construction, as long as you deal with the problems that should be paid attention to in summer, construct safely, reasonably and efficiently, and do every work according to the normal construction process, you can also make a project that satisfies you

brand store: Dulux

first, drink enough water for the tiles

in summer, because the materials are drier than usual, for floor tiles, ceramic tiles and other materials that need to be soaked in water, the soaking time should be extended to make them fully close to the saturation state. In this way, there will be no hollowing and falling off due to weak bonding with cement due to water absorption during bonding

second, control the setting time

when dealing with materials similar to gypsum, the setting time should be strictly controlled. Because in high temperature and dry weather, the molding of gypsum is more difficult to control, so the setting time should be strictly controlled to make it reach the standard compressive tensile strength and fineness

III. wall treatment should be clear-cut

in the treatment of interior wall paint, due to the hot climate in summer, special attention should be paid to its stability, bonding strength and initial drying crack resistance. At this time, the method is to carefully observe the details, make detailed time records, and then make comparisons

IV. pay attention to the thermal expansion and cold contraction of size

when measuring and installing plastic steel doors and windows and sliding doors, pay attention to thermal expansion and cold contraction in size arrangement. Because plastic steel is a material greatly affected by temperature, if the size arrangement is too compact, cracks and deformation will appear in winter due to the decrease of temperature, so the size should be slightly surplus

v. compact flooring

when paving the floor, the gap should be arranged more closely than before, so as to avoid the gap becoming larger and affecting the appearance when the temperature drops. At the joint between the floor and the wall, the floor batten can be used to form a transition. In this way, not only the disadvantages of excessive gap between the wall and the floor are handled, but also the aesthetic effect is played

recommended link: fresh and fashionable friends 40000 to create a 50 flat blue and white Mediterranean beauty home

太原皮肤病医院

广州胎记疤痕医院

上海癫痫医院

Copyright © 2011 JIN SHI